'Slimlight' Unwired Connector Block, Male, White

'Slimlight' Unwired Connector Block, Male, White

The CBM is an unwired connector block, male, for use with the slimlight fluorescent lighting.

General Information : -

The range of slimlight fluorescent lighting
includes a number of available lights and
connector cables, which can be used under
cupboards to illuminate a work surface, or on
top of wall units to add more light to the room.
The fluorescent lights include suppressers
and are all individually switched with male
connector at one end and female connector at
the other. The switch is located nearest the
female connector. We recommend that a
competent electrician install all light fittings.
Lights use 'Sylviana' warm white tubes (colour
code 129).

• Slim profile only 37 mm high
• High quality epoxy coated steel cases
• All lights comply with British Standards and have the CE mark
• Modular system
• Individually switched
• Pre-wired connector fittings
• Female nearest switch
• Bulbs are "warm white" in colour.

WARNING: All electrical fittings must be
installed by a qualified electrician. Care must
be taken where lights are enclosed in a
cabinet, ensure there is adequate ventilation.
Light fittings should not be fitted in the vicinity
of flammable surfaces. Low voltage lamps
must never be touched by unprotected fingers.