'Sonnet' Double Bowl Inset White Ceramic Kitchen Sink

'Sonnet' Double Bowl Inset White Ceramic Kitchen Sink

Ceramic double bowl sink with drainer in white. Supplied with 2x 90mm chrome wastes.

Overall sink dimensions: 1200 x 500mm
Bowl dimensions (x2): 340 x 378mm

Fits into a 800mm wide carcase.

Sonnet is a high quality range of ceramic kitchen sinks. Made from traditional firecast methods and finished with a china glaze, this styled range will provide a practical and attractive focal point in any kitchen. All sinks are pre-drilled underneath for tap holes if required, alternatively taps can be fitted through the worktop.

The range includes a single bowl single drainer, 1.5 bowl with drainer, double bowl and double bowl with drainer. Full and half chrome baskets are also available.

NOTE - Ceramic products can vary up to -/+ 2% in size.

General Information : -

If removing the pre-drilled tap hole, please note the following:
. Identify the centre of the pre-drilled hole you wish to use. This is clearly marked on the underside.
. Mark the position on the top of the sink.
. Place the sink in a well-supported position
. Position a sharp-ended nail punch on the mark you have made and strike firmly with a hammer until the point has broken through.
. Gradually enlarge the hole by carefully chipping away the remaining material until the hole is big enough to take the tap.
NOTE:
. Do not try to knock the hole out from underneath.
. Do not strike the sink while the drainer is unsupported.
. Ensure you strike the sink on the pre-drilled position.
Carefully chip away material to enlarge the hole! Do not try to chip away large sections and do not chip away outside the pre-drilled area.