|
'Sonnet' Single Bowl Inset White Ceramic Kitchen Sink
'Sonnet' Single Bowl Inset White Ceramic Kitchen Sink
Supplied with 90mm chrome waste.
Dimensions:
- Overall sink dimensions: 860 x 500mm
- Bowl dimensions: 360 x 378mm
- Fits into a 500mm wide carcase
Sonnet is a high quality range of ceramic sinks. Made from traditional firecast methods and finished with a china glaze, this styled range will provide a practical and attractive focal point in any kitchen. All sinks are pre-drilled underneath for tap holes if required, alternatively taps can be fitted through the worktop.
The range includes a single bowl single drainer, 1.5 bowl with drainer, double bowl and double bowl with drainer. Full and half chrome baskets are also available.
NOTE - Ceramic products can vary up to -/+ 2% in size.
General Information : -
If removing the pre-drilled tap hole, please note the following:
. Identify the centre of the pre-drilled hole you wish to use. This is clearly marked on the underside.
. Mark the position on the top of the sink.
. Place the sink in a well-supported position
. Position a sharp-ended nail punch on the mark you have made and strike firmly with a hammer until the point has broken through.
. Gradually enlarge the hole by carefully chipping away the remaining material until the hole is big enough to take the tap.
NOTE:
. Do not try to knock the hole out from underneath.
. Do not strike the sink while the drainer is unsupported.
. Ensure you strike the sink on the pre-drilled position.
Carefully chip away material to enlarge the hole! Do not try to chip away large sections and do not chip away outside the pre-drilled area.
|
