Transformer, Wire-Wound, 60 Watt

The TW60 has a maximum loading of 60
watts and a minimum loading of 20 watts.
Approximate dimensions: 80mm x 68mm x
66mm.

Wire wound transformers are a range of
transformers combining the reliability of
non-interference wire wound transformers
with the flexibility of electronic transformers.
Supplied with approx. 2m of mains lead. They
do not have to be earthed.

This range of transformers can be used with
dimmers as long as the dimmer is suitable
for an inductive load.

These transformer are fitted with a thermal
regulator switch which will shut the
transformer down if it gets too hot. If this
happens then the transformer should be left
to cool down then switched off at the mains for
20 - 25 seconds, this will re-set the regulator
switch.

General Information : -

WARNING: All electrical fittings must be
installed by a qualified electrician. Care must
be taken where lights are enclosed in a
cabinet, ensure there is adequate ventilation.
Light fittings should not be fitted in the vicinity
of flammable surfaces. Low voltage lamps
must never be touched by unprotected fingers.